Shipping Used Construction Equipment to Europe
Bought a machine at a US auction for a European buyer? Selling used equipment to a dealer in Belgium or Germany? A&A Cargo Logistics Inc. is a licensed NVOCC and freight forwarder in Ruskin, Florida, and our team has more than 30 years of combined experience. We book ocean freight for excavators, wheel loaders, dozers, cranes, telehandlers, attachments and other used construction equipment from US ports to Europe's main ports.
Who We Work With
- Equipment dealers sending trade-ins and used stock to European buyers
- Brokers who need a dependable forwarder on every deal
- Auction buyers (and their agents) moving machines from US auction yards to Europe
US Departure Ports
We can book from any US port. Most European equipment shipments leave from the Northeast, East Coast, Southeast and Gulf ports, because that's where transatlantic service runs most often. Send us the machine's location and we'll suggest a practical port. (Inland trucking to the port can be quoted separately. See Freight Transport.)
RoRo vs Flat Rack vs Breakbulk: Which Fits Your Machine?
RoRo (Roll-on/Roll-off)
Good for self-propelled machines that run and can be driven or towed on board, such as wheel loaders, excavators on tracks, graders and some cranes. The cargo is stowed below deck, away from the weather. It's often the simplest choice for machines that run. → RoRo Shipping
Flat Rack Containers
Good for machines that don't run, are over-width or over-height, or are tracked units that a RoRo service won't accept. The equipment is lashed onto a collapsible flat rack and shipped on a container vessel. → Flat Rack Shipping
Open Top and Breakbulk
Open-top containers suit tall cargo that fits within a container's width and is loaded from above. Breakbulk suits very large or heavy pieces that won't fit in or on a container and are lifted aboard one at a time. → Open Top & Breakbulk Shipping
| RoRo | Flat Rack | Open Top | Breakbulk | |
|---|---|---|---|---|
| Machine must run | Usually yes | No | No | No |
| Oversized OK | Within deck limits | Yes | Height only | Yes |
| Typical use | Loaders, excavators, graders | Non-running and over-width units | Tall attachments, parts | Very large or heavy pieces |
Important: who loads the cargo
A&A Cargo books and coordinates the ocean shipment. We do not load, stuff, lash or secure equipment on flat racks or in containers, and we do not drive or load machines. The shipper (or their chosen terminal or rigging contractor) arranges loading and securing. We can tell you what the carrier will require.
Main European Destination Ports
- Antwerp-Bruges, Belgium: a major European hub for RoRo and breakbulk
- Zeebrugge, Belgium: a major RoRo port
- Rotterdam, Netherlands: Europe's largest port, with strong container and flat rack service
- Bremerhaven, Germany: a major RoRo and vehicle port
- Hamburg, Germany: a large container and breakbulk port that serves Central and Eastern Europe
We can also look at other European ports on request. See our USA–Europe shipping lane and USA–UK & Ireland pages.
Incoterms in Plain Language (FOB and CIF)
Incoterms® are the standard trade terms that set where the seller's responsibility ends and the buyer's begins. Agree on one in your sales contract.
- FOB (Free On Board), [US port]: The seller delivers the machine, cleared for export, on board the vessel at the US port. From that point the buyer pays for and takes the risk of ocean freight, insurance and import. Note: Incoterms 2020 intends FOB for sea cargo loaded on board, such as RoRo and breakbulk. For containerized cargo, FCA is often the better fit.
- CIF (Cost, Insurance and Freight), [EU port]: The seller pays ocean freight and minimum insurance to the named EU port. The risk still passes to the buyer once the cargo is on board in the US. The buyer handles unloading, import clearance, duties and VAT.
Not sure which term to use? Tell us who is paying for what and we'll quote to match. (General information only, not legal advice.)
Cleanliness and Washing Requirements
Used equipment going to Europe should arrive thoroughly clean: no soil, mud, plant matter, seeds or insects on the tracks, undercarriage, buckets, radiators or cab. RoRo carriers and terminals commonly inspect machines and can refuse dirty cargo or charge for cleaning, and EU plant-health rules restrict soil and plant material. Have the machine pressure-washed (and the paperwork showing it was washed kept on file, if available) before it goes to the port. Cleaning is the shipper's responsibility.
CE Marking: What Buyers Should Know
Construction machinery placed on the EU market generally has to meet EU machinery safety rules and carry CE marking. Many US-spec machines were not built with CE marking. Getting them conformity-assessed or retrofitted (for example lighting, guards, signage, or noise and emissions requirements) is the importer's or buyer's responsibility and can be costly. Before you buy, check with your EU customs broker or a conformity specialist whether the machine can be registered or used in the destination country. A&A Cargo handles the transport. We do not certify CE compliance.
Documents Overview
- Commercial invoice and bill of sale
- Packing list / equipment description (make, model, serial/VIN, dimensions, weight)
- Proof of ownership or title, where applicable
- Export filing through AES (EEI), when required. Typically required for shipments valued over $2,500 per Schedule B line, and also needed for some used self-propelled vehicles
- Bill of lading (issued by us as NVOCC, or by the carrier)
- Cleanliness or wash confirmation, if the carrier requests it
- On the EU side, the buyer's customs broker handles the import declaration, EORI number, duties and VAT
What We Don't Handle
- Hazardous materials (hazmat). We do not ship hazmat cargo. Machines must meet the carrier's rules for fuel level and batteries (usually near-empty fuel tanks, with batteries disconnected or secured as the carrier specifies).
- Loading, stuffing, lashing or driving equipment. These are the shipper's responsibility.
Why A&A Cargo
- Licensed NVOCC and freight forwarder based in Ruskin, FL
- 30+ years of combined team experience in heavy and project cargo
- RoRo, flat rack, open top and breakbulk options, compared for your machine
- One contact from booking through arrival in Europe
Frequently Asked Questions
Can you ship a non-running excavator to Europe?
Yes. Non-running machines usually go on a flat rack or as breakbulk. The shipper arranges loading and securing.
Which is cheaper, RoRo or flat rack?
It depends on the machine's size, whether it runs, the departure port and sailing schedules. We compare the options for each quote.
Which European ports do you ship to?
Mainly Antwerp, Zeebrugge, Rotterdam, Bremerhaven and Hamburg. Other ports are available on request.
I bought equipment at a US auction. Can you pick it up?
We can coordinate inland transport to the port. Loading at the auction yard has to be arranged by the buyer or the yard.
Does the machine need to be washed?
Yes. Equipment should be free of soil and plant material. Dirty machines can be refused or charged for cleaning.
Will my US machine be legal to use in the EU?
Not automatically. CE-marking and local registration rules apply. Check with your EU broker or a conformity specialist before you buy.
Do you handle hazardous cargo?
No. A&A Cargo does not ship hazmat.
FOB or CIF: which should I use?
FOB puts ocean freight in the buyer's hands. CIF has the seller pay freight and insurance to the EU port. Either way, the risk passes once the cargo is loaded in the US.
Get a Quote for Your Equipment Shipment
Send us the make and model, dimensions and weight, whether it runs, where it's located, and the destination port. We'll recommend the best way to ship it.
